Page Comparison

This manual can help to adjust the Call Analitycs for the Kazoo and Ring Central. General System settings in the Creatio are similar for Kazoo and Ring Central. Different steps in Analitycs Authorization will be described

...

1. In the left menu select the ‘Studio’ option (Fig. 1) Fig. 1

   

2. In the opened section on the left select ‘System Setting’ and after that click on the ‘Velvetel Call Analitycs’ (Fig. 2) Fig. 2

   

3. For the ‘Analytics Account ID’ and ‘Authentication service api key’ settings required data should be requested from the support. (Fig. 3) It can be done via the following email: Received data should be filled into the ‘Default value’ fields (Fig. 4, Fig. 5). All other options should be untouched and in the default states Fig. 3

   

   Fig. 4

   

   Fig. 5

   

4. For the listed settings, the following values should be filled into the ‘Default value’ fields (Fig. 6, Fig.7): All other options should be untouched and in the default states

   • Audio Loader Endpoint - https://bpmcallanalytics.velvetech.com/al

   • Authentication service endpoint - https://bpmcallanalytics.velvetech.com/as

   • Entity Recognition Endpoint - https://bpmcallanalytics.velvetech.com/er

   • Transcripts Endpoint - https://bpmcallanalytics.velvetech.com/sr

   • Transcript UI URL - https://bpmcallanalytics.velvetech.com Fig. 6

     

     Fig. 7 (As an example ‘Authentication service endpoint’

     Image RemovedImage Added

The following flow of the Analytics Authentification is for the Kazoo telephony. Actions can be performed by the Agent or

...

/and Supervisor

1. Click on the Profile icon and select ‘Your Profile' (Fig. 8 ) Fig.8

   

2. Click the ‘Setup call analytics settings’ (Fig. 9) Fig.9

   Image RemovedImage Added

3. To finalize the Call Analitycs setup, press ‘AUTHENTIFICATE CALL ANALYTICS’ (Fig. 10) Fig. 10

   Image RemovedImage Added

4. The following pop-up informs that all settings are applied and the Call Analytics is setup (Fig. 11) Fig. 10

   

5. Press ‘Ok’.

6. Possible Troubleshooting.

   1. If the button ‘AUTHENTIFICATE CALL ANALYTICS’ from Fig. 10 is inactive, then one (several) settings from the p.p. 3 and 4 of the General Setting are not filled or have been filled with incorrect values

   2. Check them, refill them if necessary, and try to click ‘AUTHENTIFICATE CALL ANALYTICS’

The following flow of the Analytics Authentification is for the Ring Central

1. Steps that are described in the p.p. 1 and 2 of the previous section are applicable

2. After entering the Call Analytics section, first, click ‘AUTHENTIFICATE CALL ANALYTICS' and then 'AUTHORIZED CALL ANALYTICS IN RC' (Fig. 11) Fig. 11

   Image Added

3. If the Authorization is successful, a message will be shown.