Page Comparison

This manual can help to adjust the Call Analitycs for the Velvetel, Kazoo and Ring CentralRingCentral. General System settings in the Creatio are similar for Velvetel, Kazoo and Ring CentralRingCentral. Different steps in Analitycs Authorization will be described

in separate points of this manual. 1.

General Settings

1. In the left menu select the

...

1. ‘Studio’ option (Fig. 1) Fig. 1 Creatio General Dashboard

   Image Added

2. In the opened section on the left select

...

1. ‘System Setting’ and after that click on the ‘Velvetel Call Analitycs’ (Fig. 2) Fig. 2 System Setting General Section

   Image Added

2. For the ‘Analytics Account ID’ and ‘Authentication service api key’ (Fig. 3) - required data can be requested from the support via the following email velvetel.support@velvetech.com Fig. 3 Velvetech Call Analytics Section

   1. Image Added

3. Received data should be filled into the ‘Default value’ fields (Fig. 4, Fig. 5). All other options should be untouched and in the default states Fig. 4 Analytics Account ID Default Value Field

   • Image Added

     Fig. 5 Authentication Service API Key Default Value Field

     Image Added

4. For the listed settings, the following values should be filled into the ‘Default value’ fields (Fig. 6, Fig.7):

   • Audio Loader Endpoint - https://bpmcallanalytics.velvetech.com/al

   • Authentication service endpoint - https://bpmcallanalytics.velvetech.com/as

   • Entity Recognition Endpoint - https://bpmcallanalytics.velvetech.com/er

   • Transcripts Endpoint - https://bpmcallanalytics.velvetech.com/sr

   • Transcript UI URL - https://bpmcallanalytics.velvetech.com All other options should be untouched and in the default states Fig. 6 Sections With Filled Default Value

     Image Added

     Fig. 7 (As an example ‘Authentication service endpoint’)

     Image Added

The following flow of the Analytics Authentication is for the Velvetel telephony. Actions can be performed by the Agent and Supervisor

1. Click on the Profile icon and select ‘Your Profile' (Fig. 8 ) Fig.8 Your Profile Selection

   Image Added

2. Click the ‘Setup call analytics settings’ (Fig. 9) Fig.9 User Profile Section Options

   Image Added

3. To finalize the Call Analitycs setup, press ‘AUTHENTICATE CALL ANALYTICS’ (Fig. 10) Fig. 10 Call Analytics Setting Section

   Image Added

4. The following pop-up informs that all settings are applied and the Call Analytics is setup (Fig. 11) Fig. 11 Confirmation pop-up

   Image Added

5. Press ‘Ok’.

6. After this, all Call Analytics settings for Ring Central are considered to be done.

7. Possible Troubleshooting.

   1. If the button ‘AUTHENTICATE CALL ANALYTICS’ from Fig. 10 (Call Analytics Setting Section) is inactive, then one (several) settings from the p.p. 3 and 4 of the General Setting are not filled or have been filled with incorrect values

   2. Check them, refill them if necessary, and try to click ‘AUTHENTICATE CALL ANALYTICS’

The following flow of the Analytics Authentication is for the Ring Central

1. Steps that are described in the p.p. 1 and 2 of the previous section are applicable

2. After entering the Call Analytics section, first, click ‘AUTHENTICATE CALL ANALYTICS' and then 'AUTHORIZED CALL ANALYTICS IN RC' (Fig. 12) Fig. 12 Ring Central Call Analytics Settings Section

   Image Added

3. If the Authentication is successful, a message similar to Fig. 11 will be shown.

4. After the ‘AUTHORIZED CALL ANALYTICS IN RC’ is pressed a pop-up will be shown (Fig. 13). Here a SignIn into the Ring Central should be performed. Fig. 13 Ring Central Authorization Pop-Up

...

5. If the Authorization is successful a pop-up with the following message will be shown (Fig. 14) Fig. 14 Ring Central Confirmation Message

...

6. After this, all Call Analytics settings are considered to be done