Page Comparison

This guide is about how the Caller ID (the phone number shown to the callee when agents make outgoing calls) can be configured on the Velvetel Portal by using the CallFlow application. It can be done in the following sections according to the hierarchy

• DeviceAccount

• User

• Account

• Device

Account level is the default one. If there is a need to configure additional Caller ID settings it can be done at the User. If the Caller Name ID is set on the Divece Device level, this setting will be applied. If there are no settings on the Device is no Caller ID at any level, the Caller Device Name from the User level will be applied. Account level is the basic one. If there is no Caller Name at any level a default setting on the Account level will be applied (What is the Default value? )used as Caller ID.

Caller Name Configuration

1. Enter the corresponding cluster Portal:

   1. US cluster - https://portal.velvetel.net/uiv2/

   2. EU cluster - https://portal-eu.pbx-cloud.velvetel.net/monster-ui/

2. Enter your

   1. Username

   2. Password

   3. Account Name

3. Click on the 'Apps' icon in the upper bar (Fig.1) 
   Fig. 1 Location of the 'Apps' icon 

   

4. Select ‘Callflows’ application (Fig. 2)
   Fig. 2 Location of the ‘Callflows’ application

   

5. Setting up the Caller Name on the DeviceID in the Account Settings. It can be done by clicking on selecting the ‘Device’ ‘Account Settings’ section (Fig. 3)
   Fig. 3 ‘Device’ section selection

   Image Removed

   Choose the required device from the left-side menu and click on it ‘Account Settings’ location

   Image Added

6. ‘Caller ID Number' can be set in the ‘Account's External/Off-net Caller ID' section. The base value is 'Default’. (Fig. 4)
   Fig. 4 Device selection

   Image Removed

7. Press the ‘Advanced’ Tab and select the ‘Caller ID’ section (Fig. 5, Fig. 6)
   Fig. 5 ‘Advanced’ Tab selection

   Image Removed

   Fig. 6 ‘Caller ID’ section

   Image Removed

8. A required phone number should be entered into the ‘Caller ID Number’ field in the format according to the placeholder and after that, the ‘Save’ should be pressed (Fig. 7)
   Fig. 8 ‘Caller ID Name’ field location

   Image Removed

9. Setting up the Caller Name ‘Account's External/Off-net Caller ID' section

   Image Added

10. To change the Value a drop-down can be opened and the required phone number can be searched (1) or/and selected (2). You can also type your Caller ID in case it does not follow E.164 standard (e.g. your local provider connected to Velvetel via SIP trunk expects phone numbers to start with 0). To apply the changes the ‘Update’ button can be pressed (Fig. 5)
    Fig. 5 Selection and application of the Caller ID Number

    Image Added

11. Setting up the Caller ID for the User. It can be done by clicking on the ‘User’ section (Fig. 86)
    Fig. 8 6 User section selection

    

12. Select the required User from the left-side menu (Fig. 97)
    Fig. 9 7 User selection

    

13. In the ‘Outbound Calls’ section enter the required phone number into the ‘Caller ID Number’ and press ‘Save’ button (Fig. 10). 8). Please note that Caller ID can be different for internal calls (e.g. calling extensions), and external calls (e.g. calling call phone of your client).
    Fig. 10 8 ‘Caller ID Name’ in the User section

    

14. Setting up the Caller Name in the Account SettingsID on the Device. It can be done by selecting clicking on the ‘Account Settings’ ‘Device’ section (Fig. 119)
    Fig. 11 ‘Account Settings’ location

    Image Removed

    ‘Caller ID Number' can be set in the ‘Account's External/Off-net Caller ID' section. Base value is 'Default’. (9 ‘Device’ section selection

    Image Added

15. Choose the required device from the left-side menu and click on it (Fig. 10)
    Fig. 10 Device selection

    Image Added

16. Press the ‘Advanced’ Tab and select the ‘Caller ID’ section (Fig. 11, Fig. 12)
    Fig. 12 ‘Account's External/Off-net Caller ID' section

    Image Removed

    To change the Value a drop-down can be opened and the required phone number can be searched (1) or/and selected (2). To apply the changes the ‘Update’ button can be pressed (Fig. 13)
    Fig. 13 Selection and application of the Caller ID Number

    Image Removed

    11 ‘Advanced’ Tab selection

    Image Added

    Fig. 12 ‘Caller ID’ section

    Image Added

17. A required phone number should be entered into the ‘Caller ID Number’ field in the format according to the placeholder and after that, the ‘Save’ should be pressed (Fig. 13). Please note that Caller ID can be different for internal calls (e.g. calling extensions), and external calls (e.g. calling call phone of your client).
    Fig. 13 ‘Caller ID Name’ field location

    Image Added