Page Comparison

1. Choose the script that you are going to change and click [Edit] (Fig. 1)
   Fig. 2. Choosing the script to change
   

   Image RemovedImage Added

2. You will see the General information: (Fig. 2)
   Fig. 2. General information section
   

   Image RemovedImage Added

   1. Add some additional information to the general information: Add items to a tab. Drag and drop the [Text] icon to the [General info] field (Fig. 4)
      Fig. 4. Dragging and dropping the [Text] icon to the [General info] field
      

   Image Removed
   1. Image Added

   2. Click [Label] (Fig. 5)
      Fig. 5. Clicking [Label]
      

   Image Removed
   1. Image Added

   2. Drag and drop one of the report items into the label field and then click [Save] (Fig. 6)
      Fig. 6.  Dragging and dropping one of the report items into the label field
      

   Image Removed
   1. Image Added

   2. Click [Text to display] (Fig. 7)
      Fig. 7. Clicking [Text to display]
      

   Image Removed
   1. Image Added

   2. Drag and drop the same report item into the text field as in the previous step. Click Save (Fig. 8)
      Fig. 8. Dragging and dropping the report item into the text field
      

   Image Removed
   1. Image Added

   2. The result will look like this (Fig. 9):
      Fig. 9. The result of dragging and dropping the report item into the text field
      

   Image Removed
   1. Image Added

      1. But this basically means that this information will be propagated to the general info if it is available.
         Click [X] to delete this information (Fig. 10):
         Fig. 10. Deleting the information
         

   Image Removed
   1. 1. Image Added

   2. Click [Add New Property] to add a new report item (Fig. 11.). The new item you are going to add must already exist in Creatio.
      Fig. 11. Adding new report item
      

   Image Removed
   1. Image Added

   2. Enter a new item and click [Save] (Fig. 12).
      Fig. 12. Adding new item and saving it
      

   Image Removed
   1. Image Added

   2. Add a new tab. Click [+] to add a new tab (Fig. 13).
      Fig. 13. Adding a new tab
      

   Image Removed
   1. Image Added

   2. To rename the tab, double click it and enter the name (Fig. 14)
      Fig. 14. Renaming the tab
      

   Image Removed
   1. Image Added

   2. Click anywhere on the screen to save it.

   3. Click [x] to delete the tab (Fig. 15).
      Fig. 15. Deleting the tab
      

   Image Removed
   1. Image Added

3. Change the call script.

   1. Click the [Call script] (Fig. 16).
      Fig. 16. Opening the Call script section
      

      Image RemovedImage Added

      1. You will see the current call script, which consists of several steps (Fig. 17):
         Fig. 17. The current call script
         

      Image Removed
      1. Image Added

      2. Click on the step to see it and edit, then click [Cancel] (Fig. 18):
         Fig. 18. Editing a call script
         

      Image Removed
      1. Image Added

   2. Add text to the step 

      1. Drag and drop the [Text] control to the block (Fig. 19)
         Fig. 19. Dragging and dropping the [Text] control to the block
         

         Image RemovedImage Added

      2. To enter text, click [Text to display] and enter text in the [Text] field (Fig. 20).
         Fig. 20. Entering the text in the [Text] field
         

         Image RemovedImage Added

      3. Click [Save] (Fig. 21)
         Fig. 21. Saving the text in the [Text] field
         

         Image RemovedImage Added

      4. You can add more text to this field.Click the [+] button to do this (Fig. 22):
         Fig. 22. Adding more text to the field
         

         Image RemovedImage Added

      5. To enter text, click [Text to display] and enter text in the [Text] field, click [Save]. Click the [-] button to delete it (Fig. 23):
         Fig. 23. Deleting the text
         

         Image RemovedImage Added

      6. Drag (Fig. 24) and drop the box (Fig 25) to move it to a certain position in this step.
         Fig. 24. Moving the box to a certain position
         

         Image RemovedImage Added

         
         Fig. 25. Dragging and dropping the box to a certain position
         

         Image RemovedImage Added

      7. Click the [X] button to delete this box (Fig. 26):
         Fig. 26. Deleting the box
         

         Image RemovedImage Added

   3. Add a dropdown to a step 

      1. Drag and drop the [Dropdown] control (Fig. 27) to the block.
         Fig. 27. Dragging and dropping the [Dropdown] control to the block
         

         Image RemovedImage Added

      2. To enter text, click [Text] and enter text in the [Text] field (Fig. 28)
         Fig. 28. Entering the text in the [Text] field
         

         Image RemovedImage Added

      3. Click [Save] (Fig. 29).
         Fig. 29. Saving the text in the [Text] field
         

         Image RemovedImage Added

      4. Click the [DropDown] box (Fig. 30) and fill out the fields to customize the dropdown.
         Fig. 30. Customizing the dropdown

         Image RemovedImage Added

      5. Click [Save]

      6. Drag (Fig. 31) and drop the box (Fig. 32) to move it to a certain position in this step.
         Fig. 31. Moving the box to a certain position

         Image RemovedImage Added

         
         Fig. 32. Dragging and dropping the box to a certain position

         Image RemovedImage Added

      7. Click the [X] button to delete this box (Fig. 33):
         Fig. 33. Deleting the box

         Image RemovedImage Added

   4. Add [Input] to the step 

      1. Drag and drop the [Input] control (Fig. 34) to the block.
         Fig. 34. Dragging and dropping the [Input] control to the block

         Image RemovedImage Added

      2. To enter text, click [Text] and enter text in the [Text] field (Fig. 35).
         Fig. 35. Entering the text in the [Text] field

         Image RemovedImage Added

      3. Click [Save] (Fig. 36).
         Fig. 36. Saving the text in the [Text] field

         Image RemovedImage Added

      4. Click the [Input] box, fill in the fields, and click [Save] to customize the input field (Fig. 37).

         Fig. 37. Customizing the [Input] field

         Image RemovedImage Added

      5. Drag and drop the box (Fig. 38) to move it to a certain position in this step.
         Fig. 38. Dragging and dropping the box to a certain position

         Image RemovedImage Added

      6. Click the [X] button to delete this box (Fig. 39):
         Fig. 39. Deleting the box

         Image RemovedImage Added

   5. Add [input (large)] to the step 

      1. Drag and drop the [Input (large)] control to the block (Fig. 40).
         Fig. 40. Dragging and dropping the [Input (large)] control to the block

         Image RemovedImage Added

      2. Click the [Input (large)] box, fill in the fields and click [Save] to customize this field (Fig. 41).
         Fig. 41. Customizing the [Input (large)] field

         Image RemovedImage Added

      3. Drag and drop the box (Fig. 42) to move it to a certain position in this step.
         Fig. 42. Dragging and dropping the box to a certain position

         Image RemovedImage Added

      4. Click the [X] button to delete this box (Fig. 43):
         Fig. 43. Deleting the box

         Image RemovedImage Added

   6. Add button to the step 

      1. Drag and drop the [Button] control (Fig. 44) to the block to add a new button box.
         Fig. 44. Dragging and dropping the [Button] control to the block

         Image RemovedImage Added

      2. Click the [Button] to customize it (Fig. 45).
         Fig. 45. Customizing the [Button]

         Image RemovedImage Added

      3. Enter the button name and select from the dropdown list a step this button leads to (Fig. 46).
         The button can lead to the next record, and when you click it, a new record of new contact will be opened according to your list, or it can also lead to the other existing steps.

      4. Click [Save].
         Fig. 46. Entering the name of the button and selecting from the dropdown list a step this button leads to and saving

         Image RemovedImage Added

      5. Drag and drop the box (Fig. 47) to move it to a certain position in this step.
         Fig. 47. Dragging and dropping the box to a certain position

         Image RemovedImage Added

      6. Click the [X] button to delete this box (Fig. 48):
         Fig. 48. Deleting the box

         Image RemovedImage Added

      7. Click the [+] (Fig. 49) to add additional buttons to the existing button box and configure this button as described above.
         Fig. 49. Adding the additional button to the existing button box

         Image RemovedImage Added

      8. Click the [-] button to delete it (Fig. 50).
         Fig. 50. Deleting the additional button from the existing button box
         

         Image RemovedImage Added

   7. Add a new step 

      1. Click the [Add step] button to add a new step (Fig. 51).
         Fig. 51. Adding a new step to the call script
         

         Image RemovedImage Added

      2. Click on the new step to customize it (Fig. 52). 
         Fig. 52. Customizing the step

         Image RemovedImage Added

      3. Enter the step name.

      4. Enable the check-box (Fig. 53), if you want to complete the activities processing in this step of the script. 
         Fig. 53. Enabling the check-boxSelect the [Result] and the [CRM Result] of this step from the dropdown list.

         Image RemovedImage Added

      5. Click [Save]. 

      6. Click on the step and then click [Delete step] to delete it (Fig. 54). 
         Fig. 54. Deleting a step

         Image RemovedImage Added

4. Click [Submit], this button saves the structure of the call script (Fig. 55).
   Fig. 55. Saving the structure of the call script

   Image RemovedImage Added

5. Click [Publish] to use the call script (Fig. 56).
   Fig. 56. Publishing the call script

...